News

Location: Home  /  News  /  Industry Trends
Will stainless steel valves rust? The reasons and protection measures are all explained.
Date:2026-07-21 12:00:00 Author:Zhejiang Yonghao Valve Co., Ltd.

Stainless steel valves are not completely immune to rust. Their rust prevention ability comes from a dense layer of chromium oxide film (passivation film) on the surface. This film can isolate water and oxygen, achieving the effect of preventing rust. However, if this film is damaged, the valve will still experience rusting problems.


1. Common causes of rusting


Electrochemical corrosion: Surface accumulation of other metal dust and foreign metal attachments form micro batteries in humid air, destroying the passivation film and causing rust.


Chemical corrosion: Long-term contact with acids, alkalis, salts, and high-chlorine seawater/seawater mist environments will directly erode and damage the passivation film, for example, ordinary 304 stainless steel is prone to rust in coastal salt fog environments.


Human and environmental damage: Scratches during installation, residual iron filings, strong acid cleaning agents, or sulfur compounds in polluted air, all damage the protective film and cause local rusting.


Insufficient material quality: Some low-priced stainless steel products do not meet national standards, with insufficient chromium content, unable to form a stable passivation film, and naturally prone to rust.


2. Practical protection methods


Choose the appropriate material: For ordinary water usage scenarios, select 304 stainless steel. For high-salt and high-corrosion environments such as coastal areas and chemical industries, use 316 or even duplex stainless steel materials to enhance the anti-corrosion ability from the root.


Perform regular maintenance: Regularly wipe the valve body with neutral cleaner and soft cloth to remove surface deposits, avoiding the long-term accumulation of scale and impurities; regularly apply lubricating oil to the valve stem position and open and close the valve regularly to avoid impurities getting stuck.


Install and construct in accordance with specifications: Clean the heat affected area after welding and avoid using carbon steel tools to directly scrape the stainless steel surface to prevent residual iron filings from causing rust.


Maintain a dry environment: In humid areas, ensure ventilation to avoid the valve remaining in a high-condensing water sealed environment for a long time, reducing the probability of the passivation film being eroded.


Home
Products
Contact